Total weight of one set of hopper augers is 220 lbs. The specially designed gearboxes have a shaft angle and ball bearings to provide years of dependable service.
|
|
Augers are available with center delivery for trailers with minimum length of 31 ft. The clearance underneath auger after installation is 14" on most trailers. The Hydraulic requiremnt is 15 GPM with a 2500 psi bypass. Unloading rate is approx. 300 bushels per minute per auger. Hopper auger depth is 9". |
|
|
This system can be used with airseeder loading auger. The down spout are attached to a 7" auger system. This hopper auger system is mounted so that the auger heads do not protrude past the side of the trailer. |
|
|
This 5.9 cubic inch hydraulic motor comes with a flow control valve to regulate speed. The motor
is reversible, allowing easy clean out. The hydraulic motor can be powered by "T"ing
on the existing hydraulic line on the airseeder, or on the semi tractor unit.
|
|
|
The hopper augers are wasily detached by removing 5 bolts. The trap door can be opened to allow
for easy unloading at elevator.
|
|
|
This system can be used as a transfer auger in the fall. Unloading with both "hopper
augers" will keep up to a 10" auger. Total weight of one set of hopper augers is 220 lbs. The specially designed gearboxes have a shaft angle and ball bearings to provide years of dependable service. |
|
|
Optional electric solenoids are available with elcectric switch or wireless remote.
|
| Cancade Trailer Augers | Cancade Truck Augers | Back to Main Page |